Miele Vacuum Cleaner Hose

All Miele bagged cylinder vacuum cleaners come with a suction hose that is used to connect the canister to the handle. While they may all look the same, there are two types of suction hoses. The first one is the electric hose that is used for vacuum cleaner models with motor-driven floorheads. The other type is the non-electric hose.

It is important to note that Miele vacuum cleaner hose is not universally compatible. This is the reason why it is important to check the specifications indicated in your vacuum cleaner manual to see which hose type it goes with.

Benefits of Buying Genuine Miele Hoses

Miele hoses, just like the vacuum cleaners and attachments from this brand, can be quite expensive to replace. You might be tempted to purchase generic replacement hoses to save. While they do look similar, the quality of the Miele vacuum cleaner hoses is incomparable to the counterfeit products.

First, the Miele hoses are constructed from high-quality crush-proof plastic. This means that you can move and bend it around and it will retain its shape. Because the airpath remains the same circumference, the level of suction remains constant no matter how you move.

Next, Miele hoses are light and flexible. You will appreciate this when you load your hose with the handle, telescopic wand, and floorhead. A heavy hose would add to the weight and cause fatigue if you need to vacuum for a long time.

Where to Buy the Miele Vacuum Cleaner Hose?

You can buy the Miele vacuum cleaner hose online by clicking below.


Showing the single result

Added to wishlistRemoved from wishlist 0
Add to compare
Miele SFS 10 Flexible Suction Hose Extension

Miele SFS 10 Flexible Suction Hose Extension

Best deal at: Amazon.com

Additionally, Miele hoses are extra durable. They do not crack easily so you can be sure that they would last you for many years. They also provide superior sealing so that the suction does not get affected. If you buy a generic hose, there are instances when they don’t attach firmly to the canister, or the handle and they develop holes. Air can enter and exit through the gaps, reducing the level of suction.

How to Connect the Hose to Your Miele Vacuum Cleaner?

Connecting the hose to you Miele vacuum is super easy. The part that you attach to the canister itself has a notch. You need to line this up with the corresponding notch on the hole in the canister. For the newer models, you will hear a click when the hose is correctly attached to the body of the vacuum cleaner.

The other end of the hose is where the banana handle (or the bent end hose or handle) goes. There is no notch to line up on this end. Just make sure that you hear a click after you insert the hose into the handle to know that it is securely attached.

From there, you can decide whether you want to add a wand to your set up or attach a brush or floorhead instead.

How to Extend the Miele Vacuum Cleaner Hose?

While the Miele vacuum cleaner hose is considerably long, ranging from 1.6m to 1.8 m in length, there are situations when you need something longer to reach certain areas.

For example, if you need to clean the interior of a small car or clean a high ceiling feature. You won’t be able to carry the canister with you, limiting the reach of your vacuum. To extend the reach, you can use the Miele SFS 10 Flexible Suction Hose Extension. This extension will boost the cleaning reach of your vacuum cleaner by 1.5 meters.

Note though that the Miele SFS 10 only works with the following models: S500 / S600 / S700 / S800 / S2000 / S4000 / S5000 / S6000.

Common Reasons Why Your Miele Vacuum Hose Stops Working

The first thing you need to check if your vacuum cleaner is not providing the right level of suction is the connections of the hose. Check if the hose is firmly attached to the canister and to the handle. Check also if there are any cracks or tears on the hose. Some people advice using duct tape or glue to seal any tears or holes on the flexible body of the hose. This will be a temporary fix.

Eventually, you will still need to buy a replacement hose once the tears become to large or too many to tape up.

Next, see if there are any obstructions in the hose. While it may seem impossible for any object to get through the wand and get lodged in the hose, there could be a build up of debris inside the hose that could hamper the airflow. Try to dislodge this using a thin stick. Never wash the hose in water, especially if it is the electric kind.

If the hose still doesn’t work properly, especially if it is the electric type, you may assume that there is something wrong with the mechanism. Don’t try to repair it yourself. Bring the hose and the vacuum cleaner to a Miele service center for proper assessment.

Compare items
  • Total (0)
Shopping cart