Miele SEB 217-3 Electro Floorbrush
The Miele SEB 217-3 Electro Floorbrush is a midsize floor brush that is compatible with the Miele Classic C1, Compact C2, and Complete C3 line. It can also be used with the S1, S55, S700, S2000, and S5000. This is a good floor brush to use for deep cleaning all types of surfaces.
However, due to lack of height-adjustment feature, it works best only for low and medium-pile carpeting. It can also be used on bare floors. The brush roll is motor driven to provide extra suction power. The nylon bristles on the brush head are soft to gently separate the fibers. It glides easily over surfaces fatigue-free cleaning.
$149.21
Description
If you are looking for a more affordable (…than the Miele SEB 236) floor brush that can go from hardwood to carpet, then the Miele SEB 217-3 Eletro Floorbrush is for you. It works with C1, C2, and C3 lines. It is also compatible with the S1, S55, S700, S2000, and S5000. It can clean any surface with ease, thanks to its strong motor.
The Miele SEB 217-3 Electro Floorbrush provides 10 ¼ inch of edge-to-edge cleaning and is ideal for vacuuming entire rooms. The nylon bristles are soft, yet firm enough to provide the agitation needed to dislodge dust and deep-seated dirt.
Miele SEB 217-3 Electro Floorbrush Best Price
Miele SEB 217-3 Electro Floorbrush Details
The Miele SEB 217-3 Electro Floorbrush is a slim power nozzle that does an amazing job of cleaning every type of surface from medium pile carpeting to bare, hard floor. Its design allows it to glide over carpets. The brush roll floats to adjust to any bumps on the surface.
The floorbrush is also equipped with small rubber wheels to help you move the vacuum brush around. The wheels also prevent scratches on your hard floors.
One problem that many vacuum cleaner owners encounter is their vacuum nozzle sealing onto the surface that they are cleaning. Miele addressed this problem by adding air vents on top of the accessory. This improves the airflow and prevents the vacuum cleaner’s attachment from latching onto the carpet or bare floor.
However, because of the considerable suction power, and lack of height adjustment features, the brush can still lock onto deep pile carpets.
The body of the brush is made of durable plastic and only weighs 3.19 pounds. Its 10 ¼-inch motor-driven roller brush makes vacuuming large areas less tiring. Plus, it is super easy to maneuver because of its light weight, floating brush roll, and swivel neck design.
You won’t feel too fatigued even after vacuuming several rooms in one go.
Where to Buy the Miele SEB 217-3 Electro Floorbrush?
You can buy this vacuum cleaner floorhead at the following online retailers.
Amazon.com Why is the Miele SEB 217-3 Not Working?
One of the reasons why a Miele SEB 217-3 Electro Floorbrush will fail to work is if its roller brush becomes entangled with hair and fibers. Once this happens, the brush will stop spinning and it would be harder to push the attachment around.
Check the roller brush to see if this is the case. If it is, then follow the cleaning instructions below.
If the vacuum cleaner is on but the brush’s motor refuses to work, then it could be an electrical issue. You will need to bring the floorbrush to a Miele service center nearest you.
How to Clean Miele SEB 217-3 Floorbrush?
From time to time, you will need to clean your Miele SEB 217-3 Electro Floorbrush to keep it functioning properly. To clean the interior of the brush, you need to remove the maintenance panel by turning the two yellow screws at the bottom. You can use a screwdriver, kitchen knife, or a coin for this.
Remove the brush roll by carefully separating it from the belt on one side. Check the roller bearings for tangled threads and hair. The bearings are the yellow squares at the ends of the brush roll. Pull on them and check for any debris. You can use a brush to scrub off any stubborn dirt.
Get a knife or a pair of scissors to remove all the hair tangled on the bristles. Use a damp cloth to wipe the chamber.
When you are done, re-insert the brush roll onto the chamber, make sure that the belt is attached before pushing the brush roll into its slot. Secure the cover and tighten the yellow screws.
Where is the Miele SEB 217-3 Electro Floorbrush Manufactured?
The body and roller brush of the Miele SEB 217-3 Electro Floorbrush are manufactured in the Miele factory in Dongguan, China. The motor comes from the Miele factory in Euskirchen, Germany.
Miele SEB 217-3 Electro Floorbrush Prices
Price History
Additional information
Specification: Miele SEB 217-3 Electro Floorbrush
| Product Information | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||
| Features and Functions | ||||||||||||||||||||
| ||||||||||||||||||||
Miele SEB 217-3 Electro Floorbrush Videos
